2008 Maintainer Service Body Utility/Service

SPECS:
NEW Maintainer Mechanics Service Body,
Serial:Z150 /6353CB ,
Pressurized storage system,
3/16" Single piece aluminum doors,
59" Tall Oxy/Act storage,
Line-X protective spray covering,
26" workbench bumper with 2 side storage compartments,
1 vise/grinder removable mounting plate,
welder mounting angles for top of compartment installation.

Crane by Maintainer,
Model:8000TT,
8,600lb. capacity with hydraulic extend hex-boom 10' to 24',
Hydraulic up/down outriggers / manual extend crane side,

Model VHP40RMH Ingersoll-Rand hydraulic air compressor,
40 CFM @ 100 PSI / 40 CFM @ 150 PSI, Serial:396443UASA65,
Air accessory package with filter, lubricator and regulator,
Hannay 1/2" x 50' spring rewind reel, hose and ball stop,
20 Gallon air tank, EZ Latch Aluma 7-Drawer system.

CHASSIS SPECS:
Engine:6.7L ISB Cummins,
Trans:Aisin AS68RC 6 spd. automatic,
Ratio:4.88,
Suspension:Springs,
Brakes:Hydraulic and exhaust brake,
GVWR:19,500lbs.,
Front Axle:7,000lbs.,
Rear Axle:13,500lbs.,
Wheelbase:168.5",
CA:84

**NOTE** LUBE SKID OPTIONAL.
- Features:Lube Tanks -
Tanks equipped with filtered fill caps,
suction screen, guarded sight gauge,
shut-off valve on tank suction line, tank baffles and tank rack.
- Plastic Lube Tanks –
(4) 75 gallon tanks - (3) oils & (1) evac,
Air Driven Pump Kits – (3) Air Kit #1 Oil - Graco pump (regulator & oiler) 5:1 ratio,
0-3 GPM delivery (consult factory for oil type),
Hannay 1/2" X 50' spring rewind reel, high-flow non-drip rigid dispenser.
(1) Air Kit #8 Evacuation - diaphragm pump (regulator) 0-15 GPM delivery w/ hydraulic,
10wt or 20wt @ 60 degrees F., 0-8 GPM delivery w/ 30wt, 50wt or 90 wt @ 60 degrees F.

View PDF Line Drawings Here: http://www.texastruckcenter.com/maintainer/Z150%20-%206353CB%20Line%20Drawing.PDF.pdf

View PDF Specs Here: http://www.texastruckcenter.com/maintainer/Z150%20-%20EQ%20Specs.pdf